| Customization: | Available |
|---|---|
| Application: | Construction |
| Material: | Acrylic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Conductive Adhesive for ESD Vinyl Floorings Antistatic PVC Tiles
This conductive adhesive product is a kind of dispersion Monocomponent antistatic adhesive, which is widely used to paste many kinds of antistatic and static dissipative sheet PVC flooring.
Application Instruction:
1. Make sure the floor is clean, dry, smooth and without sand booming.
2. this product does not need to mix water. Stir thoroughly the product before use
3. Please use the B3 to spread glue uniformly on the substrate. According to the working temperature and humility, wait about 5-10min, then the substrate is ready to lay flooring and use the cork the press the flooring.
4. After the flooring material is applied on the substrate, press the surface by a 50kg pressure roller to achieve the uniform effect, the sheet flooring should be flat and avoid stretching.
Technical Specification of Conductive Adhesive for ESD Vinyl Floorings Antistatic PVC Tiles:
| Item | Requirement |
| Colour | grey |
| PH | 7-8 |
| spreading rate | 120-180g/m*m |
| Waiting time | (depending on humidity and temperature) |
| construction time | Within 30-60 minutes after the completion of the waiting time |
| Quality Guarantee Period | 12months |
| load time | ≥72h |
| density | 1.1kg/L |
| bleeder resistor | lower than 1x10 6 Ohm |
| Packaging Details: | 20kg/bucket |
Substrate treatment:
The surface should be clean, dry flat, durable and no structural damage, and have strong resist compression, bending strength, no oil and demoulding agent.
Features of performance:
1. Stable quality bonding, durable resilience
2. contain the conductive fibre
3. working time is long
4. Eco-friendly
5. Easy application, high coverage rate.
6. Good initial tack
Notice:
The best contracture environment is above 15degree and lower than 75% about humidity.
don't pour the adhesive into the sewer and drain. the unused adhesive should be sealed. the tools can be cleaned with water.
it should be protected against frost and direct sunlight during transportation, storage and application. Application temperature should not be lower than 5ºC.
Projects as reference(Conductive Adhesive for ESD Vinyl Floorings Antistatic PVC Tiles):
){kind=link}